We use cookies and other tracking technologies to improve your browsing experience on our website, to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from.
The Ball-Type Diverter valve (BTD) is designed to divert or converge abrasive products in pneumatic conveying systems. Its ductile cast iron construction, replaceable wear components, and pressure-assisted sealing make it suited to demanding installations with relatively high pressures and temperatures. Two removable side covers allow seals to be replaced while the valve remains in place, making routine servicing more practical.
The Ball-Type Diverter valve (BTD) is designed to divert or converge abrasive products in pneumatic conveying systems. Its ductile cast iron construction, replaceable wear components, and pressure-assisted sealing make it suited to demanding installations with relatively high pressures and temperatures. Two removable side covers allow seals to be replaced while the valve remains in place, making routine servicing more practical.
ATEX
Execution Available
7
Available sizes
Thank you
Your quote request has been received!
Something went wrong.
One moment..
BTD BALL-TYPE DIVERTER VALVE
The BTD is built for pneumatic conveying systems where abrasive materials place high demands on the valve. Its robust construction, replaceable wear components, and in-place seal replacement support reliable operation and practical servicing under demanding process conditions.
The BTD uses a robust ductile cast iron body and replaceable wear bushings on the outlet to withstand abrasive dry bulk solids.
The valve can be used for both diverting and converging duties.
The BTD uses a design in which the seal becomes tighter as positive pressure increases.
BTD BALL-TYPE DIVERTER VALVE
The BTD uses a robust ductile cast iron body and replaceable wear bushings on the outlet to withstand abrasive dry bulk solids. It is designed for demanding applications where wear is a significant operating consideration.
The valve can be used for both diverting and converging duties. In diverting applications, the product forms its own wear surface, whereas in converging applications, the impact area is reinforced.
The BTD uses a design in which the seal becomes tighter as positive pressure increases. This supports reliable sealing across the valve’s operating pressure range.
Two removable side covers provide access to replace the seal without removing the valve from the installation. This makes servicing easier where avoiding unnecessary disruption is important.
The BTD operates at pressures ranging from -0.5 to +6 barg and is suitable for conveying products at temperatures up to +80°C. Higher-temperature versions are available on request.
Ball Diverter Valve
The BTD is a heavy-duty ball diverter valve for abrasive products in pneumatic conveying systems. It is suited to applications such as power generation, incineration, foundries, and industries handling cement, glass, ceramics, lime, gypsum, and chemicals. Its ductile spheroidal cast iron body, replaceable outlet wear bushings, and grease-lubricated shaft seals are designed for demanding operating conditions.
Seven sizes are available from 65 to 250. The valve operates across a pressure range of -0.5 to +6 barg and handles standard conveying product temperatures up to +80°C, with higher-temperature versions available on request. ATEX 2014/34/EU certification is available.
| BTD BALL DIVERTER VALVE | 65 | 80 | 100 | 125 | 150 | 200 | 250 |
|---|
*More detailed information is found in our product documentation
6
barg
Maximum allowable working pressure
7
sizes
Available from 65 to 250
80°C
Maximum standard conveying product temperature
2
duties
Diverting or converging
Request a quote · 48h response
Thank you
Your quote request has been received!
Something went wrong.
One moment..
